The slitting method of titanium alloy plate and titanium strip is characterized by using the process route method of clamping - slitting - directional parting - pressing plate - parting - winding - unwinding - packaging for uncoiling titanium and titanium alloy strip. By adopting the method of the invention, titanium and titanium alloy strip coils with an opening length of thousands of meters can be longitudially cut, the uneven part of the edge of the titanium strip can be cut, and the wide titanium strip can be longitudially cut into a number of narrow titanium strips of different widths according to the user's requirements. Or just trim the titanium strip, keeping it wide.

Clamping is by clamping a pair of cots will run titanium belt into the slitting machine; Longitudinal cutting is through a set of disk scissors installed on a pair of transverse roller, the titanium strip in operation along the length of the titanium strip longitudinal cutting into a number of narrow titanium strips of different widths; At the same time, the irregular part of the edge of the titanium strip is cut off with the outermost two pairs of disk shears, and the cut edge line is wrapped by the collecting wheel on the side of the disk shears into edge line coil; Directional cloth is to separate the longitudinal shear narrow titanium strip by setting on a pair of transverse cots cloth plate guide, the same gap between the adjacent narrow strip, neatly into the platen table.

The pressing plate is used to guide the winding machine through the clamping of the pressing plate platform. Coil segmentation is to cut the slitting titanium strip into coils of different lengths according to the needs; Winding: the narrow titanium strip is guided by a group of directional distribution disks arranged above the coiling mandrel, and wound into multiple narrow titanium coils on the same coiling mandrel; All discharge volume refers to the narrow titanium roll roll, the coil car support from below titanium coil, contraction reel up piece, make titanium volume inner core is loose, manual with banding belt will narrow titanium roll banding fastening, rotating reel ejecting beside then go to Taiwan, will narrow the titanium roll from the reel core shaft, rotary discharge volume then go to Taiwan, will narrow the titanium volume to the packaging on the paper and packaging.